Advanced Operations; Total Time/Count Display - Omron H5S Instruction Manual

6. Advanced Operations

6-1. Total Time/Count Display

This function displays the total elapsed time and total count of
external inputs.
If the upper limit of the total time or the total count is set, it is
also possible to display the alarm indicator.
Total time display
(Displayed when the total
elapsed time is 30,000 hours.)
<Resetting the total time and count>
Press CLEAR
total time or count is displayed.
Press
WRITE
and total count.
The resetting is cancelled
by pressing
"clr" is flashing.
Note
• Before using this function, input assignment is required. (
• How to display total time or count. (
• How to set the alarm value for the total time or count. (
• The alarm indicator,
its preset alarm value.
• The total time display is shown in 0.1 hour unit.
• When the total time/count exceeds 99999.9 h or 999999, the time/count returns to 0.
• The totalizing function cannot be used when power is OFF.
• Refer to "Section 3. Wiring" in the Installation for wiring.
Alarm indicator
for 3 s or more while the
to reset the total time
CLEAR again while
, will be displayed if either total time or count reaches
- 43 -
Weekly
2 chnls
Total count display
(Displayed when the total
input count is 500,000.)
The
Section 5-7)
Yearly Yearly
2 chnls 4 chnls
color indicates flashing.
Section 6-6-2)
Section 6-6-3, 6-6-4)