Example 2 Clearing all the settings of each circuit.
Set the Mode Switch to the position of the
circuit whose settings are to be cleared.
See Section 4-5 for 4 channel type.
Hold down
("clr" appears on the main display and
"all" on the sub-display.)
Press
WRITE
Set new program or set the Mode Switch to RUN.
Note
CLEAR
• If
is pressed while "clr" is flashing, clearing operation is cancelled.
• The current time, set data of initial setting mode, holiday settings, or day
override settings cannot be cleared in the same manner.
• Yearly programs are also cleared with the yearly types.
CLEAR
for 3 s or more.
to clear all the settings of the circuit.
The
- 30 -
color indicates flashing.
SUN MON TUE WED THU
FRI
SAT