F8: Season Switching - Omron H5S Instruction Manual

6-6-8. F8: Season Switching

Programs can be automatically switched according to the set
seasons.
Parameters
No switching
off
Automatic switching (Specify the period in F9.)
on
The inverted character
Setting
The setting is made in F8 (season switching) of initial setting mode.
Press
TIME ADJ
setting mode to enter initial setting mode.
Give short presses on
move to the F8 display.
Change the setting using
(The symbol on the sub-display will flash.)
Press WRITE
(The symbol on the sub-display will change
from flashing to lighting.)
Set the Mode Switch to RUN.
Note
When this function is set to ON, the number of programmable steps is
•
changed. (Refer to "Section 4. Ratings and characteristics" in the
Installation.)
If the setting is changed between ON and OFF, all the set weekly programs
•
will be cleared.
This function switches weekly programs but not yearly programs.
•
• To leave initial setting mode, press
indicates the default.
for 3 s or more in program
TIME ADJ
or
h
to confirm the setting.
TIME ADJ
- 55 -
Weekly
2 chnls
The
and
.
m
"C" and "D" are not displayed in
the 2 channel type.
for 3 s or more.
Yearly Yearly
2 chnls 4 chnls
color indicates flashing.