Wireless Controller - Mira Vision Installation Manual

Wireless Controller

Suitable for solid, dry-lined, stud partition, shower cubicle or laminated panel
walls.
The Wireless Controller should be fixed to the wall at a convenient height for all
the family. It should be positioned so that water does not spray over it when the
Showerhead is held on the Slide Bar.
Important! Make sure wireless signal has been tested between Wireless
Controller and Digital Mixer Valve before permanently fixing to wall. (See
"Digital Mixer Valve")
Mark position for wall plate holes.
Mount wall plate on flat surface
(e.g. centre of tile).
Drill and plug holes.
Caution! Avoid drilling through
buried cables or pipes.
Make sure surface is clean and
dry. Fix wall plate to finished wall
surface.
Turn Controller over to fit batteries.
Only fit new batteries of same make
and type. Do not use rechargeable
batteries.
Hook Controller on top of wall plate
and push firmly until Controller
"clicks" back into place.
29