Mira Vision Installation Manual page 26

Insert fixing screws through holes
in Wall Brackets and fix to wall. Do
not fully tighten at this stage. Use
template to set correct distances
between Wall Brackets. Fully tighten
screws.
Note! Slots in Wall Brackets allow
for adjustment. Use one horizontal
slot and one vertical slot.
Make sure that holes for Slide Bar
Securing Screws are positioned
correctly, as shown.
Position Slide Bar over Wall
Brackets and secure with screws.
(Do not overtighten.)
Fit Slide Bar End Caps into top and
bottom of Slide Bar Assembly. Push
and twist caps until they "click" and
lock in place.
26