User Controller - Mira Activate Series Installation And User Manual

Installation: User Controller
1
Position the installation template (supplied) at the position on the wall where you intend
to install the user controller.
Make sure that the installation template is levelled and on a flat surface, the controller
must not cover any grout lines.
Caution! The user controller cable is max. 9.8m in length. When positioning
the user control ensure the cable can reach.
2
Using a suitable drill and hole saw, drill the hole for the controller cable and backplate
as per the dimensions given.
Caution! Be aware of hidden pipes or cables.
ø
29 - 30 mm
ø
6 mm
32