Mira Vision Installation Manual page 20

Place Wireless Controller in approximate final position (no
more than 10 m from Digital Mixer Valve) and test wireless
signal by pressing the " " and adjusting the temperature. If
temperature display remains unchanged and "out of range"
symbol is displayed, units are unable to communicate with each
other.
If test fails, reposition unit(s) and
repeat test until satisfied shower will
work reliably.
Caution! Risk of product damage.
Do not run Pumped Valve (low
pressure version) without a water
supply for longer than 15 minutes
during test.
Isolate electrical supply to Digital
Mixer Valve.
Mark the fixing holes in the required positions.
Fixing Screw x 3
20