Gia 63W Message Advisories - Garmin G1000 Cockpit Reference Manual

Annunciations & Alerts
GIA 63 MESSAGE ADVISORIES (CONT.)
Message
NAV1 SERVICE – NAV1 needs service.
Return unit for repair.
NAV2 SERVICE – NAV2 needs service.
Return unit for repair.
NAV1 RMT XFR – NAV1 remote
transfer key is stuck.
NAV2 RMT XFR – NAV2 remote
transfer key is stuck.
G/S1 FAIL – G/S1 is inoperative.
G/S2 FAIL – G/S2 is inoperative.
G/S1 SERVICE – G/S1 needs service.
Return unit for repair.
G/S2 SERVICE – G/S2 needs service.
Return unit for repair.

GIA 63W MESSAGE ADVISORIES

Message
GIA1 CONFIG – GIA1 config error.
Config service req'd.
GIA2 CONFIG – GIA2 config error.
Config service req'd.
GIA1 CONFIG – GIA1 audio config
error. Config service req'd.
GIA2 CONFIG – GIA2 audio config
error. Config service req'd.
GIA1 COOLING – GIA1
temperature too low.
GIA2 COOLING – GIA2
temperature too low.
106
Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG
Comments
A failure has been detected in the NAV1
and/or NAV2 receiver. The receiver may still
be available. The G1000 system should be
serviced.
The remote NAV1 and/or NAV2 transfer
switch is stuck in the enabled (or "pressed")
state. Press the transfer switch again to cycle
its operation. If the problem persists, the
G1000 system should be serviced.
A failure has been detected in glideslope receiver
1 and/or receiver 2. The G1000 system should be
serviced.
A failure has been detected in glideslope receiver
1 and/or receiver 2. The receiver may still be
available. The G1000 system should be serviced
when possible.
Comments
The GIA1 and/or GIA2 configuration settings do
not match backup configuration memory. The
G1000 system should be serviced.
The GIA1 and/or GIA2 have an error in the audio
configuration. The G1000 system should be
serviced.
The GIA1 and/or GIA2 temperature is too low
to operate correctly. Allow units to warm up to
operating temperature.
190-00963-02 Rev. C