Garmin G1000 Cockpit Reference Manual page 102

Additional Features
Video Setup
Video brightness, contrast, and saturation may be adjusted be selecting the setup
function. While viewing the setup function softkeys, after 45 seconds of softkey
inactivity, the system reverts to the AUX - VIDEO Page softkeys.
Adjusting the video settings:
1) With the AUX-VIDEO Page displayed, press the SETUP Softkey.
2) Press the BRIGHT - or BRIGHT +, to adjust display brightness in five
percent increments from 0 to 100%.
3) Press the CNTRST- or CNTRST +, to adjust display contrast in five
percent increments from 0 to 100%.
4) Press the SAT - or SAT +, to adjust display saturation in five percent
increments from 0 to 100%.
5) If desired, return the display to the default settings by pressing the RESET
Softkey.
6) Press the BACK Softkey to return to the previous softkey level.
Display Selection
Pressing the HIDE MAP Softkey removes the map and displays video on the full
screen. The softkey label changes to grey with black characters. Pressing the HIDE
MAP Softkey again restores the map view and the small video image. The softkey label
returns to white characters on a black background.
Zoom/Range
Pressing the VID ZM + or VID ZM - Softkeys increases or decreases video display
magnification between 1x and 10x.
The RANGE Knob can be used to increase or decrease the range setting on the
map display or zoom in and out on the video display. While in the Split-Screen
mode, pressing the MAP ACTV or VID ACTV Softkey determines which display the
RANGE Knob adjusts. Pressing the softkey to display MAP ACTV allows the RANGE
Knob to control the range setting of the map display. Pressing the softkey to display
VID ACTV allows the RANGE Knob to control the zoom setting of the video display.
86
Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG
190-00963-02 Rev. C