Garmin G1000 Cockpit Reference Manual page 132

Annunciations & Alerts
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message
FAILED PATH – A data path has
failed.
MAG VAR WARN – Large magnetic
variance. Verify all course angles.
SVS – SVS DISABLED: Out of
available terrain region.
SVS – SVS DISABLED: Terrain DB
resolution too low.
SCHEDULER [#] – <message>.
CHECK CRS – Database course for
LOC1 / [LOC ID] is [CRS]°.
CHECK CRS – Database course for
LOC2 / [LOC ID] is [CRS]°.
[PFD1 or MFD1] CARD 1 REM –
Card 1 was removed. Reinsert card.
[PFD1 or MFD1] CARD 2 REM –
Card 2 was removed. Reinsert card.
[PFD1 or MFD1] CARD 1 ERR –
Card 1 is invalid.
[PFD1 or MFD1] CARD 2 ERR –
Card 2 is invalid.
116
Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG
Comments
A data path connected to the GDU or the GIA
63/W has failed.
The GDU's internal model cannot determine
the exact magnetic variance for geographic
locations near the magnetic poles. Displayed
magnetic course angles may differ from the
actual magnetic heading by more than 2°.
Synthetic Vision is disabled because the aircraft
is not within the boundaries of the installed
terrain database.
Synthetic Vision is disabled because a terrain
database of sufficient resolution (9 arc-second
or better) is not currently installed.
Message criteria entered by the user.
Selected course for LOC1 differs from published
localizer course by more than 10 degrees.
Selected course for LOC2 differs from published
localizer course by more than 10 degrees.
The SD card was removed from the top card
slot of the specified PFD or MFD. The SD card
needs to be reinserted.
The SD card was removed from the bottom
card slot of the specified PFD or MFD. The SD
card needs to be reinserted.
The SD card in the top card slot of the specified
PFD or MFD contains invalid data.
The SD card in the bottom card slot of the
specified PFD or MFD contains invalid data.
190-00963-02 Rev. C