Garmin G1000 Cockpit Reference Manual page 118

Annunciations & Alerts
DATABASE MESSAGE ADVISORIES (CONT.)
Message
MFD1 DB ERR – MFD1 multiple
database errors exists.
PFD1 DB ERR – PFD1 multiple
database errors exists.
DB MISMATCH – Navigation
database mismatch. Xtalk is off.
DB MISMATCH – Standby
Navigation database mismatch.
DB MISMATCH – Terrain database
mismatch.
DB MISMATCH – Obstacle
database mismatch.
102
Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG
Comments
The MFD and/or PFD detected a failure in more
than one database. If problem persists, the
system should be serviced.
The PFD and MFD have different navigation
database versions or regions installed. Crossfill
is off. Check the AUX-SYSTEM STATUS Page
to determine versions or regions. Also, check
the AUX-SYSTEM STATUS Page for a database
synchronization function not completed. After
synchronization is complete, power must be
turned off, then on.
The PFD and MFD have different standby
navigation database versions or regions installed.
Check the AUX-SYSTEM STATUS Page to
determine versions or regions. Also, check the
AUX-SYSTEM STATUS Page for a database
synchronization function not completed. After
synchronization is complete, power must be
turned off, then on.
The PFD and MFD have different terrain database
versions or regions installed. Check the AUX-
SYSTEM STATUS Page to determine versions or
regions. Also, check the AUX-SYSTEM STATUS
Page for a database synchronization function not
completed. After synchronization is complete,
power must be turned off, then on.
The PFD and MFD have different obstacle
database versions or regions installed. Check
the AUX-SYSTEM STATUS Page to determine
versions or regions. Also, check the AUX-SYSTEM
STATUS Page for a database synchronization
function not completed. After synchronization is
complete, power must be turned off, then on.
190-00963-02 Rev. C