Invert An Active Flight Plan; Remove A Departure, Arrival, Approach, Or Airway From A Flight Plan - Garmin G1000 Cockpit Reference Manual

Flight Planning
4) Turn the small FMS Knob one click clockwise and press the LD AIRWY
Softkey, or press the MENU Key and select "Load Airway". The Select
Airway Page is displayed. The LD AIRWY Softkey or the "Load Airway"
menu item is available only when an acceptable airway entry waypoint has
been chosen (the waypoint ahead of the cursor position).
5) Turn the FMS Knob to select the desired airway from the list, and press the
ENT Key. Low altitude airways are shown first in the list, followed by "all"
altitude airways, and then high altitude airways.
6) Turn the FMS Knob to select the desired airway exit point from the list, and
press the ENT Key. 'LOAD?' is highlighted.
7) Press the ENT Key. The system returns to editing the flight plan with the
new airway inserted.

INVERT AN ACTIVE FLIGHT PLAN

1) Press the FPL Key to display the active flight plan.
2) Press the MENU Key to display the Page Menu.
3) Turn the large FMS Knob to highlight 'Invert Flight Plan'.
4) Press the ENT Key. The original flight plan remains intact in its flight plan
catalog storage location.
5) With 'OK' highlighted, press the ENT Key to invert the flight plan.
REMOVE A DEPARTURE, ARRIVAL, APPROACH, OR AIRWAY FROM A FLIGHT
PLAN
1) Press the FPL Key to display the active flight plan. Press the FMS Knob to
activate the cursor.
Or, for a stored flight plan:
a) Press the FPL Key on the MFD and turn the small FMS Knob to select
the Flight Plan Catalog Page.
b) Press the FMS Knob to activate the cursor.
c) Turn the large FMS Knob to highlight the desired flight plan.
d) Press the EDIT Softkey.
2) Turn the large FMS Knob to highlight the title for the approach, departure,
arrival, or airway to be deleted. Titles appear in white directly above the
procedure's waypoints.
30
Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG
190-00963-02 Rev. C