View The Dual Image Status - NETGEAR S350 Series User Manual

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches

View the Dual Image Status

You can view information about the active and backup images on the system.
To view dual image status information:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Maintenance > File Management > Dual Image > Dual Image Status.
The following table describes the information available on the page.
Table 72. Dual Image Status information
Field
Image1 Ver
Image2 Ver
Current-active
Next-active
Image1 Description
Image2 Description
Maintenance
Description
The version of the image1 file.
The version of the image2 file.
The currently active image on this switch.
The image to be used after the switch reboots.
The description associated with the image1 file.
The description associated with the image2 file.
335 User Manual