NETGEAR S350 Series User Manual page 23

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
To use Device View:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Device View.
The Device View page displays.
The following figure shows the Device View page for model GS324TP.
Depending upon the link status of the port, both the port and the associated port LED
display green, yellow, or black:
• Green. The port is linking at a speed of 1 Gbps.
• Yellow. The port is linking at a speed of 10 Mbps or 100 Mbps.
• Black or gray. No link is present.
For models GS324T and GS324TP, the associated port LED is at the upper left of the
panel. For model GS348T, the associated port LED is above the port.
For model GS324TP, depending on the PoE status of the port, the associated PoE LED
at the lower left of the panel is either green, yellow, or black:
• Green. The port is delivering PoE power.
• Yellow. A PoE fault occurred.
• Black or gray. The port is not delivering PoE power.
6. Click a port to open a menu that displays statistics and configuration options.
You can select a menu option to access the page that contains the configuration or
monitoring options.
Get Started 23 User Manual