NETGEAR S350 Series User Manual page 53

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Table 12. Daylight saving setting is Recurring, Recurring EU, or Recurring USA
Field
Ends At
Offset
Zone
• If you select the DayLight Saving (DST) Non Recurring radio button, the fields in the
following table are visible and you must configure them.
Table 13. Daylight saving setting is Non Recurring
Field
Begins At
Ends At
Offset
Zone
8. Click the Apply button.
Your settings are saved.
View the DayLight Saving Time Status
The Daylight Saving (DST) Status section shows information about the summer time settings
and whether the time shift for summer time is currently in effect.
Configure System Information
Description
These fields are used to configure the end values of date and time.
• Week. Configure the end week in the month.
• Day. Configure the end day in the week.
• Month. Configure the end month.
• Hours. Configure the end hour.
• Minutes. Configure the end minutes.
Configure recurring offset in minutes. The range is from 1 to 1440 minutes.
Configure the time zone.
Description
These fields are used to configure the start values of the date and time.
• Month. Configure the start month.
• Date. Configure the start date in the month.
• Year. Configure the start year.
• Hours. Configure the start hour.
• Minutes. Configure the start minutes.
These fields are used to configure the end values of date and time.
• Month. Configure the end month.
• Date. Configure the end date in the month.
• Year. Configure the end year.
• Hours. Configure the end hour.
• Minutes. Configure the end minutes.
Specify the number of minutes to shift the summer time from the standard time.
The range is from 1 to 1440 minutes.
Specify the acronym associated with the time zone when summer time is in
effect. This field is not validated against an official list of time zone acronyms.
53 User Manual