NETGEAR S350 Series User Manual page 38

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
The default password is password.
The System Information page displays.
5. Select System > Management > System CPU Status > System CPU Status.
The CPU Utilization section shows the memory information, task-related information, and
percentage of CPU utilization per task.
The following table describes CPU Memory Status information.
Table 9. CPU Memory Status information
Field
Total System Memory
Available Memory
Configure the CPU Thresholds
The CPU Utilization Threshold notification feature allows you to configure thresholds that,
when exceeded, trigger a notification. The notification occurs through SNMP trap and syslog
messages.
To configure the CPU thresholds:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
Configure System Information
Description
The total memory of the switch in KBytes.
The available memory space for the switch in KBytes.
38 User Manual