NETGEAR S350 Series User Manual page 305

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Table 67. Detailed port statistics (continued)
Field
Total Packets Transmitted
Unicast Packets Transmitted
Multicast Packets
Transmitted
Broadcast Packets
Transmitted
Transmit Packets Discarded
Total Transmit Errors
Tx FCS Errors
Total Transmit Packets
Discarded
Single Collision Frames
Multiple Collision Frames
Excessive Collision Frames
Dropped Transmit Frames
STP BPDUs Received
STP BPDUs Transmitted
RSTP BPDUs Received
RSTP BPDUs Transmitted
MSTP BPDUs Received
MSTP BPDUs Transmitted
802.3x Pause Frames
Transmitted
EAPOL Frames Received
Monitor the System
Description
The number of frames that were transmitted by the port.
The total number of packets that higher-level protocols requested be transmitted
to a subnetwork-unicast address, including those that were discarded or not
sent.
The total number of packets that higher-level protocols requested be transmitted
to a multicast address, including those that were discarded or not sent.
The total number of packets that higher-level protocols requested be transmitted
to the broadcast address, including those that were discarded or not sent.
The number of outbound packets which were chosen to be discarded even
though no errors were detected to prevent them from being delivered to a
higher-layer protocol. A possible reason for discarding a packet could be to free
up buffer space.
The sum of single, multiple, and excessive collisions.
The total number of packets sent with a length (excluding framing bits, but
including FCS octets) of between 64 and 1518 octets, inclusive, but included a
bad frame check sequence (FCS) with an integral number of octets.
The sum of single collision frames discarded, multiple collision frames
discarded, and excessive frames discarded.
The number of successfully transmitted frames on a particular interface for
which transmission is inhibited by exactly one collision.
The number of successfully transmitted frames on a particular interface for
which transmission is inhibited by more than one collision.
The number of frames for which transmission on a particular interface fails due
to excessive collisions.
The number of transmit frames discarded at the selected port.
The number of STP BPDUs received at the selected port.
The number of STP BPDUs transmitted from the selected port.
The number of RSTP BPDUs received at the selected port.
The number of RSTP BPDUs transmitted from the selected port.
The number of MSTP BPDUs received at the selected port.
The number of MSTP BPDUs transmitted from the selected port.
The number of MAC control frames transmitted on the interface with an opcode
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
The number of valid EAPoL frames of any type that were received by this
authenticator.
305 User Manual