NETGEAR S350 Series User Manual page 70

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
The following table describes the nonconfigurable fields.
Table 19. Green Ethernet Statistics Summary information
Field
Green Ethernet Statistics Summary
Current Power Consumption (mW) The estimated power consumption by all ports of the switch in mWatts.
Percentage Power Saving (%)
Cumulative Energy Saving (W * H) The estimated cumulative energy saved on the switch in watts multiplied by
Green Ethernet Feature Summary
Unit
Green Features supported on this
unit
Green Ethernet Interface Summary
Interface
Energy Detect Admin mode
Energy Detect Operational Status
EEE Admin mode
Configure and View the Green Ethernet EEE LPI History
You can configure and view the Green Ethernet EEE low power idle (LPI) history.
To configure and view the port Green Ethernet EEE LPI history:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
Configure System Information
Description
The estimated percentage of power saved on all ports of the switch if the
green modes are enabled.
hours if all green modes are enabled.
The unit ID, which is always 1.
The list of green features that are supported on the switch, which could be
one or more of the following:
• Energy-Detect (Energy Detect)
• Short-Reach (Short Reach)
• EEE (Energy Efficient Ethernet)
• LPI-History (EEE Low Power Idle History)
• LLDP-Cap-Exchg (EEE LLDP Capability Exchange)
• Pwr-Usg-Est (Power Usage Estimates).
The interface for which the information is displayed.
Indicates whether the Energy Detect mode is enabled or disabled on the
port. (For more information, see
Interface Settings on page 64
Indicates the operational status of the Energy Detect mode. (For more
Configure Green Ethernet Interface Settings
information, see
on page 64
).
Indicates whether the Energy Efficient Ethernet mode on the port. (For
Configure Green Ethernet Interface
more information, see
Settings on page 64
).
70
Configure Green Ethernet
).
User Manual