Fujitsu PRIMERGY RX800 S2 Operating Manual page 64

Hide thumbs Also See for PRIMERGY RX800 S2:
Table of Contents

Advertisement

Configuring the Server
You can specify keyboard operating characteristics, e.g. whether the server
starts with the keyboard number lock on or off. You can enable the server to run
without a floppy disk drive, monitor or keyboard.
The server uses a startup sequence to determine the device from which the
operating system is booted. For example, you can define a startup sequence
that checks for a startable floppy disk in the floppy disk drive, then checks the
hard disk drive, and then checks a network adapter.
If the server has Wake on LAN hardware and software and the operating system
supports Wake on LAN functions, you can specify a startup sequence for the
Wake on LAN functions. For example, you can define a Wake on LAN startup
sequence that checks for a startable CD-ROM in the DVD drive, then checks the
hard disk drive, and then checks a network adapter.
If you enable the boot fail count, die BIOS default setting will be restored after
three consecutive failures to find a boot record.
You also can enable a virus-warning test that checks for changes in the master
boot record at startup.
You can enable the use of a USB legacy keyboard in a DOS or System Setup
environment. If a keyboard is detected, the USB legacy operation will be
disabled.
This choice appears only on the full Configuration/Setup Utility main menu.
Advanced Setup
Select this choice to change values for advanced hardware features, such as
Memory Settings, CPU Options, PCI Slot/Device Information.
A message appears above the choices on this menu to alert you that the
i
system might malfunction if these options are configured incorrectly.
Follow the instructions on the screen carefully.
System Partition Visibility
Select this choice to identify if the System Partition is visible. To make the
System Partition visible, set this value to Visible. To make the System
Partition invisible, set this value to Hidden. Default value is Hidden.
This function is not operable for PRIMERGY RX800 S2.
i
58
Preparation for Operation
U41621-J-Z156-1-76

Advertisement

Table of Contents
loading

Table of Contents