Table of Contents
Advertisement
Preparation for Operation
If you disable the integrated USB controller, the server will have no USB
i
capability; to maintain USB capability, make sure that Enable is selected
for the USB Host Controller and USB BIOS Legacy Support options.
If the USB host controller is disabled, the RSA-II remote keyboard,
remote mouse, remote disk, OS watchdog, and in-band management
functions are also disabled.
If you disable the integrated Ethernet controller and no Ethernet adapter
is installed, the server will have no Ethernet capability.
If the integrated SCSI controller is disabled and no other controller for a
mass storage device is installed, operating-system startup cannot occur.
This choice appears only on the full Configuration/Setup Utility main menu.
Date and Time
Select this choice to view and set the date and time in the server. The system
time is in a 24-hour format (hour:minute:second).
This choice appears only on the full Configuration/Setup Utility main menu.
System Security
Select this choice to set or change the power-on password and the adminis-
trator password (for more details, see section "Passwords" on page 62).
– Power-on Password
Select this choice to set or change a power-on password.
– Administrator Password
Select this choice to set or change an administrator password. An adminis-
trator password is intended to be used by a system administrator; it limits
access to the full Configuration/Setup Utility menu. If an administrator
password is set, the full Configuration/Setup Utility menu is available only if
you type the administrator password at the password prompt.
This choice appears only on the full Configuration/Setup Utility main menu.
Start Options
Select this choice to view or change the start options. Changes only take effect
when you restart your server.
U41621-J-Z156-1-76
Configuring the Server
57
Advertisement
Table of Contents
