Table of Contents
Advertisement
Hot-plug Components
Ê Touch the static-protective package that contains the HDD module to any
unpainted surface on the outside of the serve; then, remove the HDD
module from the package.
Ê Make sure that the module handle is open; then, install the HDD module into
the hot-plug bay in the direction of the arrow (see figure 22).
Figure 22: Installing a hot-plug HDD module
Ê Push the module handle completely in the original position until the locking
mechanism engages.
U41621-J-Z156-1-76
HDD modules
107
Advertisement
Table of Contents
