Ntp Function; D Using The Ntp Time Synchronize Function; D Using The Ntp Function - Icom IC-9700 Advanced Manual

6. OTHER FUNCTIONS

NTP function

The NTP (Network Time Protocol) function
synchronizes the internal clock with a time
management server.
L To use this function, an internet connection, and
default gateway settings are necessary.
D Using the NTP Time Synchronize
function
Using this function you can manually synchronize
the internal clock by accessing a time management
server.
1. Display the DATE/TIME screen.
» SET > Time Set > Date/Time
MENU
2. Touch "<<NTP TIME SYNC>>."
• " NTP Time Sync. Please wait..." is displayed.
• The transceiver starts accessing the NTP server
address that is set in the "NTP Server Address" item.
3. When "Time Sync completed." is displayed, touch
[OK].
4. To close the DATE/TIME screen, push
several times.

D Using the NTP function

By turning ON the NTP function, the transceiver
automatically synchronizes the internal clock with the
time management server.
LThis function is set to ON by default.
LAn Internet connection is necessary.
1. Display the DATE/TIME screen.
MENU
2. Touch "NTP Function."
3. Select ON or OFF.
• When ON is selected, the transceiver starts accessing
the NTP server address that is set in the "NTP Server
Address" item.
4. To close the DATE/TIME screen, push
EXIT
several times.
6-2
» SET > Time Set > Date/Time
EXIT