Dd Mode Operation Without A Repeater - Icom IC-9700 Advanced Manual

12. DD MODE OPERATIONS

DD mode operation without a repeater

1. Set the frequency and mode
1. Set the operating frequency in the VFO mode.
(Example: 1293.100 MHz)
2. Select the DD mode.
2. Set the DD repeater simplex mode to OFF
1. Push .
FUNCTION
2. Touch (2) to change the screen page.
3. Confirm that [RPS] is set to "OFF."
• Each touch toggles the DD repeater simplex mode
ON or OFF.
4. Push several times to close the FUNCTION
EXIT
screen.
3. Set the call sign
1. Display the CALL SIGN screen.
» (2) > CS
MENU
2. Touch [UR].
L Touch [UR] for 1 second, to directly enter the call sign.
3. Touch [Your Call Sign].
4. Touch Your Call Sign, then find and touch the call
sign of the station that you want to contact.
5. Push several times to close the CALL SIGN
EXIT
screen.
6.
1. Push
2. Confirm that you can find the other station's
3. Open the shared folder.
4. Drag and drop, or copy and paste the desired file
5. After the DD mode operation
z Push
Communication status indication
The communication status in the DD mode
operation is displayed.
Indication
Confirm
12-3
4. Cancel transmit inhibit and send the data
to set [TX INHIBIT] to "OFF."
TRANSMIT
shared folder on your PC.
on to your folder.
to set [TX INHIBIT] to "ON."
TRANSMIT
Stand-by
Data receiving
L The received data is output to the PC.
[TX/RX] lights green.
Data sending
L The IC-9700 is transmitting data. [TX/
RX] lights red.
Status