D When Using The Rs-Ms3W Software - Icom IC-9700 Advanced Manual

11. ABOUT THE DV GATEWAY FUNCTION
Setting up the device

D When using the RS-MS3W software

The RS-MS3W is a Windows application to use with
the External Gateway function.
You can download it from the Icom website.
System requirements
The following are required to use the RS-MS3W.
• Operating System (OS)
Microsoft ® Windows ®
Microsoft ® Windows ®
(Except for Microsoft ®
Microsoft ® Windows ®
L You cannot use Windows Mobile.
• USB port
USB 1.1 or 2.0 port
• Data cable
OPC-2350LU
data cable
NOTE: Before using the data cable, you have to
install its USB driver. The latest USB driver and
Installation Guide for the OPC-2350LU can be
downloaded from "Options" section towards the
bottom of the firmware page on the Icom website.
Carefully read the guide, before installing the driver.
http://www.icom.co.jp/world/support/download/firm/
Installing the RS-MS3W
Download the latest RS-MS3W and its instruction
manual from the Icom website.
Read the RS-MS3W instruction manual on how to
install the software.
L Search by "RS-MS3W."
http://www.icom.co.jp/world/support/download/firm/
Connecting the OPC-2350LU
Connect the transceiver to the Windows device using
the OPC-2350LU.
IC-9700
To the [DATA] jack
NOTE: Turn OFF the transceiver before connecting
or disconnecting the cable.
(As of March 2019)
7 (32/64bit)
8.1 (32/64bit)
Windows ® RT.)
10 (32/64bit)
(purchase separately)
Windows device
OPC-2350LU
To a USB port
COM port settings
Set the data port.
1. After connecting, turn ON the transceiver.
2. Click "Com Port (P)" in the "Settings (S)."
• The Com Port Setting window is displayed.
3. Select the COM port number that the data cable
is connected to.
L Click "▼" to display the COM ports on a drop-down
list.
L See the data cable's Installation Guide that you
can download on the Icom website, for details on
checking the COM port number.
4. Click <OK>.
Setting the RS-MS3W
Set the RS-MS3W to start using the DV Gateway
function.
L The screen may be different, depending on the
application version.
Read the RS-MS3W instruction manual about each
setting item.
NOTE: About the Firewall setting
When you use a firewall security software, a
communication error may occur by the firewall
blocking the necessary ports or data.
Before using the DV Gateway function, confirm that
the RS-MS3W's communication is not blocked.
L Ask your firewall security software's manufacturer about
the setting details.
11-10