Receiving - Icom IC-9700 Advanced Manual

9. D-STAR OPERATION (BASIC)

Receiving

When a DV call is received, the call signs of the
caller, the called station, and the called station's
access repeater are saved in the RX History. Up to
50 calls can be saved.
Even if you turn OFF the transceiver, the RX History
is retained.
This section describes how to display the RX History
screen and how to save the call sign to your memory.
When receiving a call from "JM1ZLK":
The S-meter and the caller's call sign are displayed.
Step 1: To display a received call sign
Open the RX HISTORY screen.
» CD
MENU
• Rotate MAIN DIAL to confirm other RX history records.
Received repeater name, or frequency
Operating mode
Record number
Caller station*
Called station Received data
and time
* The caller name is displayed when the name is set in
"Your Call Sign" list.
Push to switch between name display and call
QUICK
sign display.
L "/" and a note may be displayed after the call sign.
L If a call is received from an area, not from a specific
station, "CQCQCQ" is displayed.
Displays
detailed screen
Sets to
destination
9-7
Step 2: Save the destination call sign into your
call sign memory from RX History
1. Rotate to select the RX history
MAIN DIAL
record with the call sign that you want to save to
memory.
2. Touch [DETAIL].
3. Push .
QUICK
4. Touch "Add To Your Memory."
5. Touch the call sign that you want to save.
(Example: "JM1ZLK")
6. Touch "NAME."
7. Enter a name of up to 16 characters, then touch
[ENT].
L See "Keyboard entering and editing" in the BASIC
MANUAL for details.
8. Touch "<<Add Write>>."
9. Touch "YES."
• Returns to the RX HISTORY DETAIL screen.
10. To close the RX HISTORY screen, push
several times.
EXIT