D Select Memory Scan Operation; D Mode Select Scan Operation - Icom IC-9700 Advanced Manual

5. SCANS
Memory scan

D Select Memory scan operation

1. Select the Memory mode.
2. Display the SCAN screen.
» SCAN
MENU
3. Touch [MEMO] for 1 second.
4. Touch the Select Memory channel number.
(Example:
1)
• Select Memory scan starts.
L When a signal is detected, the scan pauses
according to the "SCAN Resume" setting, and then
resumes.
L Touch [SELECT] to return to the regular Memory
scan.
L While scanning, touch [SEL No.] to select the Select
Memory scan number.
• To cancel the scan, touch [MEMO].
5. To close the SCAN screen, push
Clearing all Select Memory channels
1. Touch [SELECT] for 1 second on the SCAN
screen.
• The SELECT ALL CLEAR screen is displayed.
2. Touch the Select Memory channels to clear.
Mode Select scan
Repeatedly scans memory channels (except1A/1B
~ 3A/3B, C1 and C2) that is set to the mode
selected before starting the scan.

D Mode Select scan operation

1. Select the Memo
2. Set the operating mode.
3. Open the SCAN screen.
4. Touch [MEMO] for 1 second.
Blinks
5. Touch [MODE SELECT SCAN].
.
EXIT
6. To close the SCAN screen, push
5-6
Ch 1 Ch 2
FM AM
Only Memory channels set to the FM mode
Ch 99
FM are scanned.
Ch 98 Ch 50
FM DV
» SCAN
MENU
• Mode Select scan starts.
L When a signal is detected, the scan pauses
according to the "SCAN Resume" setting, and then
resumes.
• To cancel the scan, touch [MEMO].
Ch 3 Ch 4
FM FM
Ch 5
FM
Ch 7 Ch 6
AM FM
(Example: FM channels)
.
EXIT