Power Head, Piston And/Or Seal And Spacer Kit Disassembly; Replacement - Pentair FLECK 3150 NXT Installer Manual

Installer Manual Fleck 3150 - NXT - Maintenance
9.2.3. Power head, piston and/or seal and spacer kit disassembly/replacement
No.
A Using a flat screwdriver, unscrew (1) and open the cover (2).
B Using pliers, remove the clip (6) and the connecting pin (7).
C Using a 32 mm wrench, unscrew (3).
D Using a 10 mm wrench, unscrew (4) and remove the power head (5).
E Using pliers, remove the piston (10).
F Using a small hook, remove a seal (12).
G Using the puller, remove a spacer
H Repeat F and G for all the seals and spacers.
I Lubricate each new seals (12).
J Put back a seal (12) using the stuffer.
K Put back a spacer
Mandatory
Respect the order of the spacers shown on the sketch.
L Repeat J and K for all the seals and spacers.
M Lubricate the piston o-ring (11).
N Put back the piston (10).
O Follow A to D in reverse order to rebuild.
Caution
Use only approved silicone grease or soapy water.
9.2.3.1 Special tools needed
Item Part number
1 13061
2 11098
82 / 122
(8 or 9).
(8 or 9) using the stuffer.
Puller
Stuffer
Operation
Description
Ref. MKT-IM-010 / B - 28.05.2018
Packaging
quantity
1
1