WARNING: should be between 35°F (1°C) and 100°F (38°C). California Proposition 65 Warning This product contains chemicals known to the State of California to cause cancer or birth WARNING: defects or other reproductive harm. 2 • Fleck NXT Owner’s Manual...
Page 3
Display Screen Flow System Time Number Indicator of Day Volume Remaining Diagnostic Button Extra Cycle Button Shift Button Adjusts Values to the Left Up Button Adjusts Values Up Down Button Status LED Adjusts Values Down Fleck NXT Owner’s Manual • 3...
Figure 7 Regeneration Time Screen Regeneration Time • Press the Shift, Up, and Down buttons to move the cursor and change the value of the numbers. • Press the Extra Cycle button to end user programming mode. 4 • Fleck NXT Owner’s Manual...
Page 5
(following Figure 9 Manual Bypass), open Valve 2 and close Valves 1 and 3. To return the conditioner system to regular service, open Valves 1 and 3 and close Valve 2. Figure 9 Manual Bypass Fleck NXT Owner’s Manual • 5...
Page 6
Typically, this means that the valve will regenerate one day after it was originally scheduled. If the treated water output is important and power interruptions are expected, the system should be setup with a sufficient reserve capacity to compensate for regeneration delays. 6 • Fleck NXT Owner’s Manual...
Loss of water pressure Iron in conditioned water Contact your local water treatment professional. Excessive water in brine tank Other problems with the water softener Power Outage See CONTROL OPERATION DURING A POWER FAILURE for more information. Fleck NXT Owner’s Manual • 7...
Page 8
All Pentair trademarks and logos are owned by Pentair, Inc. or its affiliates. All other registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.