Totalizer; Hours Between Last Two Regenerations; Hours Since Last Regeneration - Pentair FLECK 3150 NXT Installer Manual

Installer Manual Fleck 3150 - NXT - Programming

6.6.4. Totalizer

Note
The controller registers the total volume of treated water that passes through the meter
since start-up (or last hard reset).
A To reset, press and hold the buttons
until the display shows zero.

6.6.5. Hours between last two regenerations

Note
Shows the number of hours between the last two regenerations, which indicates the
duration of the last service cycle.

6.6.6. Hours since last regeneration

Note
Shows the number of hours since the last regeneration, indicating the duration of the
current service cycle.
72 / 122
and for 5 seconds
Ref. MKT-IM-010 / B - 28.05.2018
TOTALIZER
2 LAST REGEN
0
REGEN. 
LAST
0 HOUR

:
0 L
HOUR