Auxiliary Relay / Chemical Pump - Pentair FLECK 3150 NXT Installer Manual

Installer Manual Fleck 3150 - NXT - Programming
AP Adjust the cycle time with
AQ Press to validate the selection and advance to the next
parameter.
AR Repeat for each cycle.

6.5.19. Auxiliary relay / Chemical pump

Mandatory
The system can't be set with auxiliary relay and chemical pump at the same time. Only one
option can be used.
6.5.19.1 Auxiliary relay
Set the relay output during regeneration.
Note
This parameter has two steps of settings. The first one activates the output, and the second
one deactivates the output. The time 00:00:00 correspond to the beginning of regeneration
time
AS Activate the relay with
→ Default setting: disabled
AT Press to validate the selection and advance to the next
parameter.
AU Set the relay activation time with
AV Press to validate the selection and advance to the next
parameter.
AW Set the relay deactivation time with
AX Press to validate the selection and advance to the next
parameter.
68 / 122
, and .
and .
, and
, and
1. Backwash: 10 min
CYCLE 1 00:10:00
2. Draw/Slow rinse: 1 h 10 min
CYCLE 2 01:10:00
BRINE&SLOW RINSE
3. Fast rinse: 10 min
CYCLE 3 00:10:00
4. Refill: 10 min
CYCLE 4 00:10:00
BRINE TANK FILL
5. Pause: not used
CYCLE 5 OFF
PAUSE & DELAY
Disabled
AUXILIARY RELAY:
Relay
beginning of regeneration
.
AUX RELAY OUTPUT
START:
.
Ref. MKT-IM-010 / B - 28.05.2018
BACKWASH
RAPID RINSE

DISABLED
enabled at the
00:00:00