Omron V430-F Series User Manual For Communication Settings page 80

3 Controlling Operation and Data Output with Ethernet
2
If necessary, change the Separator Character.
In WebLink - Setup - Gear Icon - Advanced Settings - Symbol Quality - Global, enter a
character for Symbol Quality Separator. Below is an example where , is used as the
Separator Character.
3
The position coordinates of the code symbol is output appended to the Read result.
The following example shows the code symbol's position coordinates appended to the Read
string ABCDE.
ABCDE,(0867,0708)(0867,0708)(1741,0673)(1741,0673)
 Output of the Symbol Quality Grade Information (ISO/IEC 15415)
• WebLink - Setup - Gear Icon - Advanced Settings - Symbol Quality - ISO/IEC 15415
1
Enable the Symbol Quality grading standard to output
The following is an example where all ISO/IEC 15415 Symbol Quality Grade parameters are
enabled.
2
If necessary, change the Separator Character.
In WebLink - Setup - Gear Icon - Advanced Settings - Symbol Quality - Global, enter a
character for Symbol Quality Separator. Below is an example where , is used as the
Separator Character.
3
The Symbol Quality Grade is output appended to the Read result.
The following example shows Symbol Quality grades appended to the Read string ABCDE.
ABCDE,C,A,C,C,C,A,A,A
3 - 36
V430-F Series Auto Focus Multi Code Reader User Manual for Communication Settings (Z407-E1)