Omron V430-F Series User Manual For Communication Settings page 17

*1 If monitor display is not required, it is not necessary to connect with a PC during operation.
Connecting by Serial (RS-232)
Triggers and Serial command input, as well as Read result judgement and Read string content data
output is transmitted over RS-232C cable. Triggers can also be input over parallel.
Basic configuration
Reader
*1 Special Ethernet cable
*1 If monitor display is not required, it is not necessary to connect with a PC during operation.
Additional Information
The cable to use for Serial (RS-232C) communication is RS-232C- I/O 2-way cable (V430-
W2-3M) specifically for the V430. Please use this cable when connecting to a PC by RS-232C.
For wiring different from that of IBM compatible PC, either make your own convertor cable, or
use the rose wire cable type (V430-W8 Series) with its RxD signal and TxD signal converted.
V430-F Series Auto Focus Multi Code Reader User Manual for Communication Settings (Z407-E1)
I/O cable
RS-232C cable
Computer
WebLink or ESP
1 Communication Specifications Overview
External devices
Trigger sensor
I/O control PLC
1
1 - 3