Omron V430-F Series User Manual For Communication Settings page 51

Using WebLink to Set Up EtherNet/IP Communication
• WebLink - Setup - Gear Icon - Advanced Settings - Communications - Ethernet
Setting Item
EtherNet/IP
Ethernet/IP Byte
Swapping
When Byte Swapping is used, the output changes as follows.
Example: Where the character string of the read code is 0123
Byte Swapping: Enabled
Byte Swapping: Disabled
V430-F Series Auto Focus Multi Code Reader User Manual for Communication Settings (Z407-E1)
3 Controlling Operation and Data Output with Ethernet
Setting Value
• •
Enabled Enabled:
•
EtherNet/IP connectivity is enabled on the reader.
Disabled
•
Disabled:
EtherNet/IP connectivity is disabled on the reader.
• •
Enabled Enabled:
•
Byte Swapping is enabled for the Read data.
Disabled
The Read data is stored in Decode Data in Little endian format.
This is used when the Endian of the CPU architecture is
diferent from that of the Read data.
•
Disabled:
Byte Swapping is disabled for the Read data.
The Read data is stored in Decode Data in Big endian format.
0011 0010 0011 0001
1 0
0011 0001 0011 0010
0 1
Description
0011 0100 0011 0011
3 2
0011 0011 0011 0100
2 3
3
3 - 7