Omron V430-F Series User Manual For Communication Settings page 110

Appendices
Outputs the total number of No Reads.
・Trigger Counter
Outputs the total number of executed Triggers.
・MatchCode Counter
Outputs one of the following.
(1) Total number of matches to the Master Symbol (When Matchcode: Enabled)
(2) Total number of Good Reads (When Matchcode: Enabled)
・Mismatch Counter
Outputs the total number of Mismatches (not matching Master Symbol).
• Read Cycle Report
Capture Time
Total Decode Time
Total Read Cycle Time
Reserved
・Capture Time
The time required for image capture. (milliseconds)
・Total Decode Time
The time required for decoding a symbol. (milliseconds)
・Total Read Cycle Time
The total time taken to read symbols. This encompasses the total time of image capture, decoding
and overhead. (milliseconds)
• Decode 4 Cycle Report
Outputs symbol information.
Decode Location Top
Decode Location Left
Decode Location Height
Decode Location Width
Code Type
Pixels per Element
・Decode Location Top
The upper left Y coordinate of the Symbol Detection Region. (pixels)
・Decode Location Left
The upper left Y coordinate of the Symbol Detection Region. (pixels)
・Decode Location Height
The Y size of the Symbol Detection Region. (pixels)
・Decode Location Width
The X size of the Symbol Detection Region. (pixels)
・Code Type
A bit indicating the Symbol Type of the decoded symbol is output.
0
A - 12
Read Cycle Report
Symbol Information
Bit
Aztec Code
V430-F Series Auto Focus Multi Code Reader User Manual for Communication Settings (Z407-E1)
Size (Bytes)
2
2
2
2
Size (Bytes)
2
2
2
2
4
4
State