Omron SYSMAC CS Series Instruction & Reference Manual page 1000

3. Instructions
EMBC
Instruction
SELECT EM BANK
Symbol
Applicable Program Areas
Function block
Area
definitions
Usage OK
Operands
Operand
N EM bank number
N: EM Bank Number
Specifies the new EM bank number in decimal (0 to 24) or hexadecimal (0000 to 0018).
 Operand Specifications
Word addresses
Area
CIO WR HR
N OK OK OK
Flags
Operand
Error Flag
Related Auxiliary Area Words and Bits
Name
Current EM Bank
966
Mnemonic Variations
EMBC @EMBC
Block program areas Step program areas
Ok OK
Description
AR T C DM EM
OK OK OK
OK OK
Description
ER • ON if N specifies a non-existent EM bank number.
• ON if automatic address allocation has been set for the specified EM bank (CJ2 CPU
• ON if the EM Area force-set/reset function is enabled (CJ2 CPU Units only).
• ON if EMBC(281) is executed in an interrupt task for a CJ2 CPU Unit with high-speed
• OFF in all other cases.
Address
A301 Contains the current EM bank number in hexadecimal
Function
code
281 Changes the current EM bank.
EMBC
EMBC(281)
N N: EM bank number
Subroutines
OK
Data type
UINT
Indirect DM/EM
addresses
Con-
stants
@DM *DM
DR
@EM *EM
OK OK OK OK
(This error will occur if the specified EM bank has been registered as file memory in
the PLC Setup.)
Units only).
interrupt function enabled.
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Function
SFC action or transition
Interrupt tasks
programs
OK OK
Size
1
Registers Flags
Pulse
Indirect
IR TK CF
using IR
--- OK --- ---
Data type
Operation
TR
bits bits
--- ---