Mitsubishi CR750 Series Instruction Manual page 86

8 Using the Force Sense Function (Programming)
No. Item
(2) [Select File]
button
(3) [Select Data]
button
(4) [Display
Range] button
(5) [Save] button
8-76 Force Sense log
By pressing the [Read RC] button and reading a log file with the [Copy File] check
box selected, a log file save screen appears after reading the log file.
Specify the file save destination and file name, and then click [OK] to save the read
log file to the computer.
By pressing this button, the following screen appears, allowing the user to read log
files selected from the log file list.
Displays a "Data Selection Screen" used for displaying data in a graph.
This button can be used after selecting a log file.
(See " 8.3.4.3 Data Selection Screen ".)
Displays a screen used to set the maximum and minimum values for the graph
horizontal and vertical axes.
This button can be used after selecting a log file.
(See " 8.3.4.4 Display Range Setting Screen ".)
Converts content in the display area to a bitmap file and saves it to the computer.
Description