The Pvid Setting Screen - ZyXEL Communications AMG1302-T10A User Manual

Chapter 14 PVID Setting
enabled for the VID of a frame, then the frame is transmitted as a tagged frame; otherwise, it is
transmitted as an untagged frame.

14.2 The pvid Setting Screen

Use this screen to activate VLAN and set up VLANs. Click Advanced > pvid Setting to display the
following screen.
Figure 95 Advanced > pvid Setting
The following table describes the labels in this screen.
Table 63 Advanced > pvid Setting
LABEL
Active
PORT
PVID
TAG
Apply
Cancel
168
DESCRIPTION
Activate or deactivate the VLAN feature.
This field displays the types of ports available to join the VLAN group.
Assign a VLAN ID for the port. The valid VID range is between 1 and 4094. The Device
assigns the PVID to untagged frames or priority-tagged frames received on this port.
Select TAG if you want the port to tag all outgoing traffic trasmitted through this
VLAN. You select this if you want to create VLANs across different devices and just
the Device.
Click this to save your changes.
Click this to restore your previously saved settings.
AMG1302-T10A User's Guide