Checking Switches And Sensors For Paper Conveying - Kyocera TASKalfa 6501i Service Manual

Item No.
U031

Checking switches and sensors for paper conveying

Description
Displays the on-off status of each paper detection switch or sensor on the paper path.
Purpose
To check if the switches and sensors for paper conveying operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
MPT Jam
Cassette1 Feed
Cassette2 Feed
Feed2(Feed B)
Regist
Belt Jam
Exit Feed
DU1
DU2
Bridge1 Feed
Bridge2 Feed
Bridge Exit
Exit Paper
Fuser Feed
Feed1(Mid)
Exit Job Separator
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
MP feed sensor (MPFS)
Feed sensor 1 (FS1)
Feed sensor 2 (FS2)
Paper conveying sensor (PCS)
Registration sensor (RS)
Loop sensor (LPS)
Switchback sensor (SBS)
Duplex sensor 1 (DUS1)
Duplex sensor 2 (DUS2)
BR conveying sensor 1 (BRCS1)
BR conveying sensor 2 (BRCS2)
BR eject sensor (BRES)
Eject full sensor (EFS)
Fuser eject sensor (FUES)
Middle sensor (MS)
JS eject sensor (JSES)
Description
Description
1-3-33
2N8/2N7