Detaching And Refitting The Power Source Pwb - Kyocera TASKalfa 6501i Service Manual

(6) Detaching and refitting the power source PWB

Procedure
1. Remove the rear lower cover (see page
1-5-3).
2. Remove 2-pin relay connector and 6-
pin relay connector.
3. Release the wire saddle.
4. Remove two screws and the connector
mount.
Wire saddle
2-pin relay connector
Connector mount
Screws
1-5-87
6-pin relay connector
Figure 1-5-135
Figure 1-5-136
2N8/2N7