Adjusting The Dp Magnification - Kyocera TASKalfa 6501i Service Manual

Item No.
U070

Adjusting the DP magnification

Description
Adjusts the DP original scanning speed.
Purpose
Make the adjustment if the magnification is incorrect in the auxiliary scanning direction when the
DP is used.
Make the adjustment if the magnification is incorrect in the main scanning direction when the CIS
is used.
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original on the DP and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.l
Display
Sub Scan(F)
Main
Scan(CIS)
Sub
Scan(CIS)
Adjustment: [Sub Scan]
1. Change the setting value using the +/- keys or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
Increasing the value makes the image longer, while decreasing the value makes the image
shorter.
2. Press the start key. The value is set.
Description
Description
Magnification in the auxiliary
scanning direction of CCD
(first side)
Magnification in the main scan-
ning direction of CIS
Magnification in the auxiliary
scanning direction of CIS
Original
Figure 1-3-11
1-3-56
Setting
range
-125 to 125 0
-100 to 100 0
-125 to 125 0
Copy
Copy
example 2
example 1
2N8/2N7
Initial Change in
setting value per step
0.02%
0.02%
0.02%