1-2-10 Installing the IC card reader holder (option)
IC card reader holder installation requires the following parts:
Parts
IC card reader holder (E)
Supplied parts of IC card reader holder (1709AD0UN0):
Parts
IC card reader holder
Label
Bundling band
Hook and loop fasteners
Spacer
Procedure
1. Press the power key on the operation
panel to off. Make sure that the power
indicator and the memory indicator are
off before turning off the main power
switch. And then unplug the power
cable from the wall outlet.
2. Remove a screw and then remove the
right table cover.
*: While holding the cover at its far end,
slide it rightwards to remove.
Quantity
Part.No.
1
1709AD0UN1 (option)
Quantity
Part.No.
1
1
1
2
2
1-2-85
-
-
-
-
-
Right table cover
Figure 1-2-128
2N8/2N7
1
2
Screw