Managing The Security License - Cisco ISA500 Series Administration Manual

Device Management

Managing the Security License

STEP 3
STEP 4
STEP 5
STEP 6
Managing the Security License
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
• Log Severity: Choose the log severity level to filter the logs.
For example: If you select Critical, all logs listed under the Critical,
Emergency, and Alert categories can be viewed.
• Log Facility: Choose the log facility to filter the logs. All logs that belong to
the selected facility and match up with the specified severity settings can be
viewed.
• Source IP: Enter the source IP address to filter the logs. All logs that match
up with this source IP address can be viewed.
• Destination IP: Enter the destination IP address to filter the logs. All logs that
match up with this destination IP address can be viewed.
Click Query.
The query outputs are displayed in the Logs table. The logs can be sorted by
clicking the cellheading in the table. By default, the logs are sorted by the time.
For example, if you click Severity, the logs are sorted by the severity level in
ascending sequence. Double click Severity, the logs are sorted by the severity
level in descending sequence.
You can specify how many logs are displayed in the table per page. If one page
cannot show all logs, use the navigation buttons to switch among the pages.
Click the >> button and then click Clear All Local Logs to clean up all logs saved
in the local syslog daemon.
Use the License Management page to manage the security license. The security
license is valid for one year or three years depending on the bundle type. The
security services that provide protection against worms, attacks, and malware are
activated by the security license. It includes the following sections:
• Checking the License Status, page 308
• Renewing the Security License, page 309
10
307