License Smart Register - Cisco NCS 1004 Command Reference Manual

Commands

license smart register

To register the device instance with Cisco licensing cloud, use the license smart register idtoken token-id
force command.
license smart register idtoken token-id force
Syntax Description
token_id
force
None
Command Default
None
Command Modes
Command History
Release
Release
7.0.1
Use this command to register the device instance with Cisco licensing cloud.
Usage Guidelines
The following example registers and sets the token ID required for registration of NCS 1004.
RP/0/RP0/CPU0:ios#license smart register token-id
Specifies the token generated in smart manager.
If the registration fails due to communication failure between the device and the portal or satellite,
the system waits for 24 hours before attempting to register the device again. Use this option to
force the registration.
Modification
This command was introduced.
license smart register
Command Reference for Cisco NCS 1004
43