Cisco ISA500 Series Administration Manual page 82

Status
Interface Status
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
PVID
Speed/Duplex
Link Status
WAN Table
The WAN table displays the following information of all WAN interfaces:
Name
WAN Type
Connection Time
Connection
Status
MAC Address
IP Address
Netmask
Gateway
DNS Server
Physical Port
Link Status
Zone
VLAN Table
The VLAN table displays the following VLAN information:
The Port VLAN ID (PVID) to be used to forward or filter the
untagged packets coming into the port. The PVID of a Trunk
port is fixed to the DEFAULT VLAN (1).
The duplex mode (speed and duplex setting) of the
physical port.
Shows if the physical port is connected or not.
The name of the WAN interface.
The network addressing mode used to connect to the
Internet for the WAN interface.
How long the WAN interface is connected, in seconds.
Shows if the WAN interface obtains an IP address
successfully or not. If yes, the connection status shows as
"Connected".
The MAC address of the WAN interface.
The IP address of the WAN interface that is accessible from
the Internet.
The IP address of subnet mask for the WAN interface.
The IP address of default gateway for the WAN interface.
The IP address of the DNS server for the WAN interface.
The physical interface that is associated with the WAN
interface.
Shows if the cable is inserted to the WAN interface or not. If
the link status shows as "Not Link", the cable may be loose
or malfunctioning.
The zone to which the WAN interface is assigned.
3
76