Reports Of Wan Bandwidth; Reports Of Security Services - Cisco ISA500 Series Administration Manual

Status
Reports
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
Click Refresh Data to update the data on the screen or click Reset Data to reset
the values to zero.

Reports of WAN Bandwidth

The WAN Bandwidth report displays the run-time WAN network bandwidth usage
by hour in the past 24 hours.
Click Status -> Report -> WAN Bandwidth.
Check the Enable WAN Bandwidth box to enable this report.
Click Save to save your settings.
After you enable this report, in the Primary WAN tab, you can see the run-time
network bandwidth usage for the primary WAN interface by hour in the past 24
hours.
If a secondary WAN interface is configured, in the Secondary WAN tab, you can
see the run-time network bandwidth usage for the secondary WAN interface by
hour in the past 24 hours.
Click Reset to reset the network bandwidth usages for both the primary WAN and
secondary WAN interfaces.

Reports of Security Services

The Security Services page displays the statistical information for all enabled
security services. To open the pages, click Status -> Report -> Security
Services. It includes the following sections:
• Web Security Blocked Report, page 88
• Anti-Virus Report, page 88
• Email Security Report, page 89
• Network Reputation Report, page 90
• IPS Policy Protocol Inspection Report, page 90
• IM and P2P Blocking Report, page 91
3
87