Cisco ISA500 Series Administration Manual page 270

VPN
Configuring the SSL VPN
STEP 4
STEP 5
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
• Secondary WINS: Enter the IP address of the secondary WINS server.
In the IE Proxy Settings tab, enter the following information:
The SSL VPN gateway can specify several Microsoft Internet Explorer (MSIE)
proxies for client PCs. If these settings are enabled, IE on the client PC is
automatically configured with these settings:
• IE Proxy Policy: Choose one of the following IE proxy policies:
- None: Allows the browser to use no proxy settings.
- Auto: Allows the browser to automatically detect the proxy settings.
- Bypass-Local: Allows the browser to bypass the proxy settings that are
configured on the remote user.
• Address: If you choose Bypass-Local, enter the IP address or domain name
of the MSIE proxy server. It is configured as an IPv4 address or fully qualified
domain name, followed by a colon and port number, for example
xxx.xxx.xxx.xxx:80.
• Port: Enter the port number of the MSIE proxy server.
• IE Proxy Exception: If you choose Bypass-Local, enter the IP address or
domain name of an exception host. This option allows the browser not to
send traffic for the given hostname or IP address through the proxy.
In the Split Tunneling Settings area, enter the following information:
Split tunneling permits specific traffic to be carried outside of the SSL VPN tunnel.
Traffic is either included (resolved in tunnel) or excluded (resolved through the
Internet Service Provider or WAN connection). Tunnel resolution configuration is
mutually exclusive. An IP address cannot be both included and excluded at the
same time.
• Enable Split Tunneling: By default, all of traffic from the SSL VPN clients is
directed through the SSL VPN tunnel. Check this box to enable split tunneling
so that the tunnel is used only for the traffic that is specified by the client
routes.
• Split Include: Choose one of the following options:
- Include Traffic: Allows you to add the client routes on the SSL VPN client
so that only traffic to the destination networks redirected through the SSL
VPN tunnels. To add a client route, enter the destination subnet to which
8
264