Cisco ISA500 Series Administration Manual page 286

User Management
Configuring the User Authentication Settings
STEP 2
STEP 3
STEP 4
STEP 5
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
In the User Login Settings area, choose RADIUS as the authentication method
from the Authentication Method drop-down list.
Click Configure to configure the RADIUS settings.
The RADIUS Settings window opens.
In the Settings tab, choose the RADIUS group for authentication and configure the
global timeout and retry settings.
• Global RADIUS Settings: Specify the global timeout and retry settings for
the selected RADIUS servers:
- RADIUS Server Timeout: Enter the number of seconds that the
connection can exist before re-authentication is required. The default
value is 10 seconds.
- Retries: Enter the number of retries for the device to re-authenticate with
the RADIUS server. If the RADIUS server does not respond within the
specified number of retries, the connection is dropped. The default value
is 3.
• RADIUS Servers: Choose the RADIUS group index from the drop-down list.
The RADIUS server settings of the selected group are disaplayed. You can
edit these settings here but the settings you specify will replace the default
settings of the selected group. To maintain the RADIUS settings, go to the
Device Management -> RADIUS Settings page. See
RADIUS Servers, page
In the RADIUS Users tab, enter the following informaiton:
• Allow Only Users Listed Locally: Click On to permit only the RADIUS users
also be present in the local database for login, or click Off to disable it.
• Mechanism for Setting User Group Membership for RADIUS Users:
Select one of the following mechanisms to configure the user group
memberships for RADIUS users:
- Use RADIUS Filter-ID: Find the group information by using the Framed-
Filter-ID attribute from the RADIUS server.
For example, the RADIUS server has three user groups (Group1, Group2,
and Group3) and the local database has two user groups (Group1, and
Group2). The following table displays the user group membership
settings.
319.
9
Configuring the
280