Maintenance With The Cleaning Sheet - SATO CL4NX Operator's Manual

5 Cleaning and Adjustment of the Printer
6
Clean the bottom of the media sensor
guide using the cotton cloth dabbed with
the cleaning liquid.
7
Put back the media sensor guide and
tilt up the sensor guide lock to lock
position.
5.2.2

Maintenance with the Cleaning Sheet

The procedures of the maintenance with the cleaning sheet are as follows:
1
Make sure that the printer is in power off
mode, then disconnect the power cord
from the AC outlet.
2
Open the top cover.
CAUTION
• Open the top cover fully to prevent accidental drop of
the cover.
3
Turn the head lock lever  clockwise to
unlock the print head.
CAUTION
• The print head and its surrounding are hot after
printing. Be careful not to get burned.
• Touching the edge of the print head with bare hand
could cause injury.
170
CL4NX Operator Manual
1