Ip Connectivity Test (Ping) - SMC Networks TigerStack 100 1000BASE-X Management Manual

IP Connectivity Test (Ping)

Use the IP Connectivity Test to see if another site on the Internet can be
reached. The screen shown below is described in the following table.
Network Configuration : IP Connectivity Test (Ping)
===================================================
IP Address :
Test Times : 1
Success
[Start]
<APPLY>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
IP Address
Test Times
Interval
Success/Failure
Interval : 3
: 0 Failure
<OK>
Description
IP address of the site you want to ping.
The number of ICMP echo requests to send to
the specified site.
Range: 1~1000
The interval (in seconds) between pinging the
specified site.
Range: 1~10 seconds
The number of times the specified site has
responded or not to pinging.
M
ANAGEMENT
: 0
<CANCEL>
S M
ETUP ENU
2-15