Table of Contents
Advertisement
Configuring Traffic Classes
IEEE 802.1p defines up to 8 separate traffic classes. This switch supports
Quality of Service (QoS) by using two priority queues, with Weighted Fair
Queuing for each port. You can use the 802.1P Configuration menu to
configure the default priority for each port, or to display the mapping for
the traffic classes as described in the following sections. Also, refer to
"Class-of-Service (CoS) Support" on page 4-7.
Use <TAB> or arrows keys to move. <Enter> to select.
802.1P Configuration : Selection Menu
====================
802.1P Port Priority Configuration ...
802.1P Port Traffic Class Information ...
<OK>
C
ONFIGURING THE
S
WITCH
2-53
Advertisement
Table of Contents
